[PnP][ENG][WIP] Unsettled

Автор kamilus121, 13 марта 2022, 22:16:51

« назад - далее »

0 Пользователи и 1 гость просматривают эту тему.

kamilus121

Unsettled (2021)
BGG, tesera

I'm resizing all elements.
Cards will fit to sleeves: small cards- sleeves mini poker 41x63, big cards 89x89 (sleeves 89x127 to cut).
I fixed/straigthened a little angle in some of cards. I made for every cards and player boards square corners. You can make it as original by yourself (with angle 45 digrees) or you can make without or rounded corners. (as you wish)

Everything you can print out on double sided foto paper 300g.
Tokens you can use cardboard or wooden: circles 20mm (puncher 19mm), square investigated tokens 20mm, disovery tokens- I blured/covered punched lines, it will have square shape 27x27mm ( I fixed opportunity and anomaly cards for that).
moment markers probably 35mm (you can use red and blue plexi circles, or figure stands or poker chips)
player boards and similar boards going to be probably 266x133mm to fit A4
dices 12mm
markers cube 8mm
more specific later

Cards back(reverse) are 1mm bigger from every sides, so you can cut according to front side cards. Its easy to see so guide lines are pointless.

You can give me some notes if you have some solutions. Thats my first try of pnp so be understanding, I'm not good at graphic corrections. If I won't able to do something I will write and maybe someone will help in future.
Here is a sample. Wenora almost complete. the rest soon, I dont have much time so be patient .

Thanks to BoardStupid

https://www.mediafire.com/file/ua21rodc32tfy3v/02+03.7z/file

chiquitadi

This game wasn't on my radar at all, thanks for sharing!
I'll go through the materials and compliment them with some 3d prints. Will post my build when it's near completion.
  •  

Cacta


Cacta


Gianzar93

#4
Thank you very much 🙏

Post Merge: 29 октября 2023, 23:36:01

Цитата: kamilus121 от 13 марта 2022, 22:16:51
Unsettled (2021)
BGG, tesera

I'm resizing all elements.
Cards will fit to sleeves: small cards- sleeves mini poker 41x63, big cards 89x89 (sleeves 89x127 to cut).
I fixed/straigthened a little angle in some of cards. I made for every cards and player boards square corners. You can make it as original by yourself (with angle 45 digrees) or you can make without or rounded corners. (as you wish)

Everything you can print out on double sided foto paper 300g.
Tokens you can use cardboard or wooden: circles 20mm (puncher 19mm), square investigated tokens 20mm, disovery tokens- I blured/covered punched lines, it will have square shape 27x27mm ( I fixed opportunity and anomaly cards for that).
moment markers probably 35mm (you can use red and blue plexi circles, or figure stands or poker chips)
player boards and similar boards going to be probably 266x133mm to fit A4
dices 12mm
markers cube 8mm
more specific later

Cards back(reverse) are 1mm bigger from every sides, so you can cut according to front side cards. Its easy to see so guide lines are pointless.

You can give me some notes if you have some solutions. Thats my first try of pnp so be understanding, I'm not good at graphic corrections. If I won't able to do something I will write and maybe someone will help in future.
Here is a sample. Wenora almost complete. the rest soon, I dont have much time so be patient .

Thanks to BoardStupid

https://www.mediafire.com/file/ua21rodc32tfy3v/02+03.7z/file

One question please, is inside the link above the players Board? Because i didn't find them when i downloaded it.

Thank you in advance!!
  •  

Cacta


Cacta

#6
Here PnP of mini expansions (updated with purple dice):

https://drive.google.com/file/d/1zI6W8lQM9SWQ6vxnzetc4FwNr4QYkXY6/view?usp=sharing



Here PnP of Scientific Fascinations & Specializations expansion:

https://drive.google.com/file/d/16AaKaL7f5FJgK5AkMZGaZpDiK7MtSRVe/view?usp=sharing



Here PnP of Koyuga, planet 007:

https://drive.google.com/file/d/1Mh7JJCacMeLLPcYpB4CrYEm_sCRsuXhF/view?usp=sharing



Thanks to BoardStupid for the scans.