Там еще спрашивают у парня как он сделал классное поле которое очень схожее по качеству с оригинальным TTR. Отвечает так:
************
I used 2-ply chipboard (which is a little thicker than the original TTR boards, but more durable) cut into six squares. I used artists' tape along some of the squares to create the folds. Then I used a spray adhesive on the underside of the map, very carefully laid it down on the board in EXACTLY the right position, then once I had wrapped the bleed around the edges of the board and allowed it to dry, I used an x-acto knife to cut the map along the folds and splits of the board.
Not terribly complicated - the hardest part was lining up the map once I'd sprayed the adhesive.
************
Кто-то может перевести эти технические точности?
Есть только общая картина. Что то брал, которое разрезал на 6 частей, каким то спреем опрыскивал. Как то там склеивал. Хотелось бы на четком русском прочитать его работу.